ANYIAMCO CHEMICALS (NIGERIA)
No. 10 Austin Opara Street, G.R.A. Phase 3, Port Harcourt, R/S, Nigeria
Tel: +234 (0) 8150 76 9796, +234 (0) 8037806448
E-mail: anyiamcochemicals2@gmail.com
Material Safety Data Sheet (MSDS)
Product: Synthetic Fluorine Free Foam Concentrate 3%
This document is provided for guidance. For an official controlled copy, request the MSDS PDF.
Section 1: PRODUCT IDENTIFICATION
- Product Name
- Synthetic Fluorine Free Foam Concentrate 3%
- Manufacturer
- Anyiamco Chemicals (Nigeria)
- Use
- Fire Extinguishing Agent
Section 2: COMPOSITION / INFORMATION ON INGREDIENTS
- Composition
- Mixture
Section 3: HAZARD(S) IDENTIFICATION
- Overview
- Causes skin and eye irritation.
- Eye
- Contact for short time may cause irritation.
- Skin
- Avoid contact with skin. Frequent or prolonged contact may dry the skin leading to discomfort and dermatitis.
- Inhalation
- May be irritating.
- Ingestion
- Ingestion is not expected route of exposure.
- Target organ
- Eyes, skin
Section 4: FIRST AID MEASURES
- Eye
- Immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. Obtain medical attention if soreness or redness persists.
- Skin
- Wash affected area with water. Obtain medical attention if irritation persists.
- Inhalation
- Move victim to fresh air. Obtain medical attention immediately for any breathing difficulty.
- Ingestion
- Dilute by drinking large quantity of water and obtain medical attention.
As part of good industrial and personal hygiene and safety procedure, avoid all unnecessary exposure to the chemical substance and ensure prompt removal from skin, eyes and clothing.
Section 5: FIRE FIGHTING MEASURES
- Description
- This product is a fire extinguishing agent. Do not use any fire extinguishing media.
Section 6: ACCIDENTAL RELEASE MEASURES
- Personal precaution
- Floor may become slippery after spillage. Walk carefully to avoid slip and fall. Wear appropriate hand gloves and nose mask.
- Environmental precaution
- Prevent spillage or leakage. Avoid discharge into water, drains or on the ground. Clean up.
- Large spills
- Use sand or earth to soak up the product and dispose into containment for proper disposal in accordance with all applicable laws.
- Small spills
- Wipe up with absorbent material.
- Other information
- Never return spills in original container for re-use.
Section 7: HANDLING AND STORAGE
- Engineering control
- Use adequate ventilation.
- Respiratory protection
- Use nose mask or respirator with cartridge.
- Skin protection
- Use appropriate PPE.
- Eye protection
- Use chemical goggles or safety glasses with side shields.
- 25 L can
- Manual handling; use forklift
- 200 L drum
- Use forklift; gently roll and keep tightly closed
- 1000 L tote
- Use forklift
- Storage consideration
- Store in its original container or appropriate end-use container. Protect base of container. Store in a cool, dry, well ventilated area under cover and out of direct sunlight, tightly closed.
- Good hygiene consideration
- Handle in accordance with good industrial hygiene and safety practices.
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
- Eye / face protection
- Wear safety glasses with side shield or chemical goggles.
- Skin protection
- Wear chemical protective equipment that is appropriate and that gives adequate protection.
- Respiratory protection
- Use nose mask or respirator with cartridge.
- General hygiene consideration
- Handle in accordance with industrial hygiene and safety practices. Avoid contact with skin.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
- Appearance
- Liquid; may present as pale yellow, golden, dark brown, or colorless (clear). Appearance may vary between production batches.
- Density
- 1.01 – 1.05
- pH
- 6.5 to 8.5
- Expansion ratio
- 10:1
- Drainage time @ 25°C
- 120 seconds
- Viscosity @ 20°C
- 20 mPa·s
- Freezing point
- < −25°C
- Sedimentation
- Sediment free
- Induction rate
- 3%
- Maximum storage temp.
- +60°C
- Lowest storage temp.
- −25°C
- Flammability
- Not flammable
- Oxidizing properties
- Not an oxidizer
- Water solubility
- Completely soluble
- Auto-ignition temp.
- Does not ignite
Section 10: STABILITY AND REACTIVITY
- Stability
- Stable.
- Hazardous polymerization
- Will not occur.
- Material to avoid
- Electrical energized equipment
- Reactivity
- Not reactive
Section 11: TOXICOLOGICAL INFORMATION
- Toxicological information
- The toxicity of this product has not been determined.
- Carcinogenicity
- This product is not considered to be carcinogenic.
Section 12: ECOLOGICAL INFORMATION
- Eco toxicity
- Not expected to be harmful to aquatic life.
- Environment effects
- An environment hazard cannot be excluded in the event of unprofessional handling or disposal.
- Degradability
- Fully biodegradable.
- Ozone depletion potential
- None
- Global warming potential
- None
Section 13: TRANSPORTATION INFORMATION
- Hazard class or division
- Not hazardous.
- Notes
- As much as possible, keep from being washed into surface water.
Section 14: OTHER INFORMATION
- NFPA health hazard rating
- 1
- NFPA flammability hazard rating
- 0
- HMIS health hazard rating
- 1
- HMIS flammability hazard rating
- 0
Section 15: Disclaimer
The above information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. Anyiamco Chemicals (Nigeria) shall not be held liable for any damage resulting from handling or from contact with the above product.